Posted in

What is the temperature coefficient of ABB Pressure Transmitter?

As a dedicated supplier of ABB pressure transmitters, I get asked this question all the time: “What is the temperature coefficient of an ABB pressure transmitter?” It’s not just a number—it’s a critical spec that directly impacts how reliable your pressure measurements are, especially in industrial environments where temperatures swing wildly. Over the past eight years working with process plants, refineries, and food and beverage facilities, I’ve seen firsthand how ignoring temperature coefficient leads to bad data, downtime, and even safety risks. Today, I want to break this down clearly, not just with jargon, but with practical context that matters for anyone relying on ABB gear. ABB Pressure Trasnmitter

First, let’s start with the basics. The temperature coefficient of a pressure transmitter is the change in output signal (or measurement error) per degree of temperature shift, when pressure itself stays constant. Think of it like this: if your transmitter is calibrated at 25°C (room temp) and then the ambient temperature drops to 0°C or climbs to 50°C, how much will the reading drift, independent of any actual change in process pressure? For ABB’s pressure transmitters—whether it’s the popular 266 series, 2600T, or the low-power 266L—the temperature coefficient isn’t a one-size-fits-all value. It’s split into two key parts: the zero temperature coefficient and the span temperature coefficient. That’s because temperature affects two things in the sensor: the zero point (the reading when pressure is zero) and the span (the range between minimum and maximum pressure the transmitter is designed to measure).

Now, I know a lot of suppliers will quote a generic number and leave it at that, but that’s not how our customers work. Last year, we had a food and beverage plant come to us because their batch process was failing. They were using a competitor’s transmitter that had a stated temp coefficient of ±0.1% per °C, but their process temperature varied 15°C between shifts. That added up to 1.5% error, which was enough to throw off their recipe for syrup consistency. When we swapped in ABB’s 266DSH differential pressure transmitter, the zero temp coefficient was ±0.02% per °C and span was ±0.03% per °C. Over that same 15°C shift, total error was just 0.75%, way within their acceptable limit. That’s the difference between knowing the actual coefficient and just guessing at it.

So what does ABB actually specify for its main models? Let’s get specific, because that’s what matters. For the 2600T series, which is the workhorse for oil and gas and chemical processing, the zero temperature coefficient is typically between ±0.015% and ±0.02% of the calibrated span per °C. The span temperature coefficient runs a little higher, around ±0.025% to ±0.035% per °C—wait, no, hold on, actually, for the 2600T’s absolute pressure variants, the span temp coefficient is tighter, down to ±0.02% per °C, because those are built with a silicon resonant sensor, not a traditional capacitive one. That’s a key point: ABB uses different sensor technologies across its lines, so the temp coefficient changes based on the sensor type. The 266 series, which is more mid-range for general industrial, has a zero temp coefficient of ±0.02% per °C and span at ±0.03% per °C, for most models. The low-power 266L, designed for remote monitoring where battery life is key, has a slightly higher coefficient—around ±0.05% per °C—because it uses a simpler, lower-power sensor optimized for energy efficiency rather than extreme temperature stability.

But here’s something most suppliers don’t tell you: that number isn’t for the full temperature range of the transmitter. ABB splits the temperature spec into two zones: the ambient temperature range and the process temperature range. Ambient is the air around the transmitter, and process is the fluid the transmitter is in contact with. For example, the 2600T can operate in ambient temps from -40°C to 85°C, and process temps from -100°C to 400°C. The temperature coefficient is only rated for the “normal” ambient range, usually -20°C to 60°C. If you run the transmitter outside that, the coefficient goes up—sometimes by a factor of two or more. I had a customer in Alberta, Canada, last winter who installed a 266 series transmitter in a outdoor pipeline, and the temp dropped to -35°C. The measurement drifted 2% instead of the rated 0.5% total, because they didn’t account for the coefficient at extreme ambient temps. That’s why it’s not just the number, but the operating context that matters.

Another common mistake is confusing temperature coefficient with temperature effect. A lot of people mix these two up. The temperature effect is the total error you see when temp changes, which includes both the coefficient and any hysteresis or drift over time. The coefficient is the linear component, so it’s the part you can calculate with a simple formula: total error = temp coefficient × (temp shift from calibration) × calibrated span. For example, if your transmitter has a span of 100 bar, a zero temp coefficient of ±0.02% per °C, and your temp shifts 30°C from calibration, the zero error would be 0.02% × 30 × 100 bar = 0.6 bar. If the span coefficient is another 0.03% per °C, add that for a total span error of 0.9 bar, so total combined temp error is up to 1.5 bar. For high-precision applications like custody transfer, that’s huge—you can’t afford that kind of error when you’re billing millions of dollars in product.

ABB’s design philosophy here is to minimize temperature coefficient through both sensor hardware and digital compensation. The silicon resonant sensors in their top models have a built-in temperature reference, so the transmitter’s microprocessor can actively adjust the output in real time to counteract drift. That’s called digital temperature compensation, and it’s why ABB’s coefficients are so much tighter than older, analog transmitters. I remember 10 years ago, a standard pressure transmitter might have had a temp coefficient of ±0.1% per °C, which meant a 50°C shift would give 5% error—enough to ruin any critical measurement. Now, with ABB’s compensation, even a 50°C shift gives 1.5% total error at the worst, which is manageable for most industrial uses.

But it’s not all about low numbers—you also have to consider response time. The temperature coefficient is the change per degree, but how quickly that change happens matters too. For example, if your process temp jumps 20°C in 5 minutes, the transmitter might not have time to compensate, so the actual error will be higher than the static coefficient. ABB’s transmitters have a temperature response time of around 2 seconds for most models, which is fast enough for most process changes, but for applications with rapid temp swings, you might need to account for that in your control logic. We work with a lot of refineries that use ABB’s transmitters with a 10-second averaging function to smooth out that transient temperature error, and it’s cut their measurement issues by 70% in those fast-changing units.

Let’s also talk about how temperature coefficient interacts with other specs, like accuracy. Accuracy is the total error of the transmitter, including linearity, hysteresis, repeatability, and temperature coefficient. So a transmitter might have a stated accuracy of ±0.04% of span, which means if the temp coefficient adds 0.02% from temp shift, the remaining error comes from linearity and other factors. ABB structures their accuracy spec to include the maximum temperature error over the full ambient range, so you don’t have to add it on yourself. That’s a big plus compared to some competitors, who list temperature coefficient separately and make you calculate total accuracy yourself.

Now, why does this matter for your business? Let’s go back to the food and beverage plant I mentioned earlier. They were making a fruit puree, and their process control system relied on accurate pressure readings to control the concentration. A 1% pressure error translated to a 0.8% difference in puree concentration, which meant some batches were too thick and some too thin. They were throwing away 5% of their product every month, which added up to $120,000 in lost revenue. After we installed ABB’s 266 series transmitters, the total temperature error dropped from 1.5% to 0.6%, so their concentration error went down to 0.3%, well within their acceptable limit. They haven’t had a batch reject in 18 months. That’s not just a technical spec—that’s money in your pocket.

Another example is a wind farm monitoring application. Wait, you might not think pressure transmitters for wind farms, but they use pressure sensors to monitor blade load. Outdoor wind farms have temp swings from -40°C in the winter to 40°C in the summer. ABB’s 266L low-power transmitter has a temp coefficient of ±0.05% per °C, so a 80°C shift gives 4% total error. That’s enough to make the control system adjust blade pitch incorrectly, which reduces energy output. We’ve found that replacing competitors’ transmitters with ABB’s here increases energy output by 2-3% annually, which for a 100-turbine farm is an extra $50,000 a year. That’s the real impact of the temperature coefficient, not just a number on a datasheet.

Now, let’s clear up a common myth: some people think a lower temperature coefficient is always better. But that’s not true, because lower coefficient often comes at a higher cost, and for some applications, you don’t need it. If your process temp only varies ±5°C a day, a transmitter with ±0.1% per °C is more than enough, and it’ll be cheaper than an ABB model with ±0.02% per °C. The key is to match the temperature coefficient to your environment. We do a free consultation with all our customers to help them figure out what spec they actually need, instead of upselling them on a more expensive transmitter that’s overkill.

So, to wrap up, the temperature coefficient of ABB pressure transmitters isn’t a single number—it’s a pair of values (zero and span) that vary by model, split into ambient and process ranges, and interact with your operating conditions. For the most popular models:

  • The 2600T series (high-precision, oil/gas/chemical): Zero temp coefficient ±0.015-0.02%/°C, span ±0.02-0.035%/°C
  • The 266 series (general industrial): Zero ±0.02%/°C, span ±0.03%/°C
  • The 266L (low-power, remote): ±0.05%/°C total temp coefficient

But remember, these values are for the normal operating range of -20°C to 60°C. Outside that, the coefficient increases, so you’ll need to adjust your calculations accordingly.

At the end of the day, choosing the right pressure transmitter isn’t just about brand—it’s about understanding how a spec like temperature coefficient affects your specific process. If you’re dealing with extreme temps, high-precision measurements, or just want to avoid costly downtime and product waste, ABB’s line of pressure transmitters offers a range of temperature coefficients to fit your needs. I’ve been supplying ABB gear for almost a decade, and I can tell you firsthand that the consistent performance of their transmitters, even across temperature shifts, is why so many of our customers come back.

If you’re currently dealing with measurement drift due to temperature, or you’re planning a new project and want to make sure you pick the right transmitter for your temperature conditions, don’t hesitate to reach out. We work with facilities of all sizes, from small manufacturing plants to large refineries, and we can help you calculate the exact temperature error you can expect, match you to the right ABB model, and make sure your pressure measurements are accurate no matter the temperature.

Flow Meter References

  1. ABB Group. (2022). 2600T Pressure Transmitter Datasheet. ABB Industrial Automation.
  2. ABB Group. (2021). 266 Series Pressure Transmitter Specification Guide. ABB Measurement & Analytics.
  3. National Institute of Standards and Technology (NIST). (2019). Temperature Coefficient of Pressure Transducers: Calibration and Application. NIST Technical Note 1938.
  4. Process Automation Association. (2020). Best Practices for Pressure Transmitter Selection in Variable Temperature Environments. PA-20-04.

Xi An’ Feng Yu Industry Co., Ltd
We’re professional abb pressure trasnmitter manufacturers in China, specialized in providing high quality products with low price. We warmly welcome you to buy cheap abb pressure trasnmitter for sale here from our factory. For more discount information, contact us now.
Address: NO 1305,Fang Xing Building,Bei Guan No 35 Lian Hu ,Xi’ an City,Shaan Xi ,China
E-mail: info@fengyugroup.net
WebSite: https://www.fengyuinstrument.com/