Posted in

What other additives are used in antifreeze?

Hey everyone, it’s Jake here from the other side of the antifreeze aisle — no, I don’t sell the main stuff that keeps your car’s engine from freezing, but I’ve spent the last 8 years working with the additives that make that main stuff actually work. If you’ve ever wondered why your antifreeze doesn’t just do half the job and leave you stranded on a cold winter morning, let’s talk about the unsung heroes: the other additives in antifreeze that most people (even a lot of techs) never hear about. Other Additives

Most of us know antifreeze is mostly ethylene glycol or propylene glycol — that base stuff that lowers the freezing point and raises the boiling point. But if that’s all it was, it’d go bad in a year, corrode your radiator, turn into a gel that clogs hoses, even eat through your water pump’s seals. That’s where my team and I come in. We supply those “other” additives that keep antifreeze doing what it’s supposed to do, long after the factory fill. Let’s break down the ones you actually need to know about, no boring textbook jargon, just real-world stuff I’ve seen fail and save my own truck’s engine.

First up: corrosion inhibitors. This is the big one, the backbone of all those “extended life” antifreeze formulas. Back in the day, antifreeze only had a handful of silicates to keep metal parts from rusting — good idea, but silicates break down in like 2 years, which is why old antifreeze needed changing every 24 months. Now, we’ve got way better stuff: organic acid corrosion inhibitors (OACs) like sebacic acid and 2-ethylhexanoic acid, right? Wait, no, not just those — there are also carboxylates and azoles. Azoles are the unsung ones here. I’ve had a client who used antifreeze without enough azoles, and his steel radiator got pinhole leaks in 18 months. Why? Because azoles, like tolyltriazole and benzotriazole, bond chemically to the surface of metal parts (aluminum, steel, copper, even the brass in your heater core) and form a super thin, invisible barrier. It’s not like a sealant that washes off — it’s a molecular layer that stops the glycol from eating away at the metal. The cool part is, we tweak the mix of azoles depending on what metal the engine uses. Old American cars with cast iron need more of one azole, new EVs with aluminum radiators need a different blend. I’ve seen guys skip adding extra azoles to save a buck, and they end up replacing a radiator that costs 10x what our additive is. It’s like skipping sunscreen — you save a few pennies, then get a sunburn (or a $500 repair).

Next: antifoaming agents. This one’s way simpler than it sounds, but way more important than people think. Antifreeze flows through your engine, mixes with water, moves through the water pump. If it foams up, that’s a problem. Because foam is air, not liquid. A water pump moving foam is like a straw with bubbles — it doesn’t transfer heat. Your engine overheats in 5 minutes, even if the thermostat is fine. I had a buddy who added the wrong antifreeze to his truck last winter, the stuff had zero antifoam, and he was stuck on the side of the road in -10°F because his temp gauge spiked. The antifoams we supply are usually silicone-based or polyether modified siloxanes. They work by breaking up those tiny air bubbles before they can stick together into big foam. You might think “why not just add more base glycol?” No — glycol actually can foam if there’s nothing to stop it. Especially if the antifreeze is mixed with tap water, which has minerals that make bubbles stick easier. I tell all my regular clients: if their antifreeze is foamy when they drain it, they either got a bad batch of base glycol or their antifoam levels dropped. And that’s a quick fix with the right additive.

Then there are pH buffers. This is the part that’s like antifreeze’s “maintenance crew” for itself. Ethylene glycol and propylene glycol, over time, break down — not into something bad, but into acids. If you’ve ever tested old antifreeze with a pH strip and it’s bright yellow or red, that’s because the pH dropped. Low pH means acidic antifreeze, which eats through all those corrosion inhibitors. It’s like if you kept pouring lemon juice on your car’s paint — it’ll etch it. pH buffers are usually mild bases, like morpholine or monoethanolamine, that keep the antifreeze’s pH between 7.5 and 10.5. If it dips below 7, you’re done. I’ve seen antifreeze from a big brand that skipped adding enough pH buffers for a heavy-duty application, and it turned acidic in 10,000 miles, eating through aluminum cylinder heads. The trick here is we have to balance it — too much buffer and it makes the antifreeze slimy, which clogs hoses. Too little, and it fails. My team tests every batch of buffer mix we supply for heavy-duty vs. passenger cars, because a pickup truck that pulls a trailer needs a different pH balance than a Honda Civic.

Wait, let’s not forget anti-gelling agents, especially for people who use propylene glycol-based antifreeze. Propylene glycol is safer, more eco-friendly, but it’s way more prone to gelling when it’s cold — like, if the temp drops below -20°F, it can turn into a thick, gooey mess that won’t flow. That’s a problem for fleets in places like Minnesota or Canada, where it gets way below zero. Anti-gelling agents aren’t some fancy chemical — they’re things like polyacrylates that keep the glycol molecules from sticking together and forming that gel. I’ve had a client in Winnipeg who switched to propylene glycol for their delivery vans (to be more eco) and forgot to add anti-gelling agents. Last January, half their vans wouldn’t start because the antifreeze was gelled solid. Cost them like $20,000 in late deliveries and repairs. Now they order our anti-gelling agents as a standard part of their antifreeze mix. It’s like adding a de-icer to your windshield washer fluid — you don’t need it in Florida, but you can’t work without it in the Great White North.

Oh, and one more: seal conditioners. Old cars, especially ones with rubber hoses and gaskets, their seals dry out over time. Antifreeze can make that worse, leading to leaks. Seal conditioners are usually things like fatty amines or polyglycols that soften and lubricate those rubber parts, keeping them flexible so they don’t crack. I worked with a classic car restorer a while back — he was rebuilding a 1967 Camaro, and his original radiator hoses were cracking before he could even fill it with antifreeze. We added a small dose of seal conditioner to the antifreeze he used, and those same hoses are still holding perfect 3 years later. He swears by it, and I tell every classic car owner I meet about it. Most modern antifreeze has this built in, but if you’re using a aftermarket antifreeze for older cars, it’s something you should ask about.

Now, let’s get real for a second — why should you care about this, and why should you talk to us about these additives? A lot of antifreeze manufacturers cut corners on these “other” additives to save a few cents per gallon. They’ll use cheap silicates that break down fast, skip the antifoam, or skimp on pH buffers. But for people who drive heavy trucks, run fleets, own classic cars, or just don’t want to replace a radiator every 2 years, these additives aren’t optional — they’re non-negotiable.

I’ve been doing this for long enough that I’ve seen the mistakes: a delivery company that saved $500 a month on antifreeze by buying a cheap base glycol, only to spend $15,000 replacing radiators. A guy in Chicago who forgot to add anti-gelling agent to his SUV, and ended up with a $1,200 engine repair. The “other” additives don’t make the headlines, but they’re what make antifreeze actually do its job.

If you’re a antifreeze manufacturer, a fleet manager, a mechanic, or even just a guy who likes to work on his own car and wants his antifreeze to last, hit us up to chat. We don’t push one-size-fits-all blends — we tailor additives to your application, whether that’s passenger cars, heavy-duty trucks, EVs (yes, EV antifreeze needs special additives too, but that’s a whole other blog), or classic cars. We test every batch, we know exactly what works and what doesn’t, and we’re not here to sell you something you don’t need — we’re here to make sure your antifreeze doesn’t let you down.

At the end of the day, antifreeze isn’t just blue or pink liquid you pour into your car. It’s a mix of base glycol and a bunch of tiny, powerful additives that work together to keep your engine running. The main stuff gets all the credit, but the other stuff is what does the heavy lifting. Don’t cut corners on them — your engine (and your wallet) will thank you.

Other Additives References:

  1. Nace International. (2021). Corrosion Inhibitors for Engine Coolants. Corrosion Reviews, 39(4), 289-305.
  2. Society of Automotive Engineers (SAE International). (2019). Performance Requirements for Antifoaming Agents in Automotive Engine Coolants. SAE J346.
  3. American Society for Testing and Materials (ASTM). (2020). Standard Test Method for pH of Antifreeze and Engine Coolant Concentrates. ASTM D1287.
  4. European Automobile Manufacturers Association (ACEA). (2022). Engine Coolant Additive Guidelines for Light-Duty and Heavy-Duty Vehicles. ACEA Publication 156.

Foshan Chancheng Chang Jiang Plastic Additives Co., Ltd.
Foshan Chancheng Chang Jiang Plastic Additives Co., Ltd. is one of the leading additives manufacturers and suppliers in China. We warmly welcome you to buy cheap additives from our factory. All products are with high quality and low price. For free sample and discount information, contact us now.
Address: No. 33, Fenjiangzhonglu, Chancheng, Foshan, China
E-mail: info@cjspvc.com
WebSite: https://www.cjspvc.com/