Posted in

How to store chain slings in cold weather?

Hey everyone! If you’re in the rigging game—whether you’re a construction foreman, a heavy equipment operator, or just someone who’s stuck dealing with chain slings through freezing winters—you know cold weather doesn’t play nice with gear. As a chain sling and hardware riggings supplier who’s been in this biz for over 12 years, I’ve seen way too many guys mess up storing their slings when temps drop, and that’s how accidents happen. Last winter alone, a couple of regulars brought me frayed, rusted chain slings they tried to “tough out” storing in the open, and one even had a link snap during a lift—lucky no one got hurt, but that could’ve been bad. Today, I’m breaking down exactly how to store chain slings when it’s icy, snowy, and way below freezing, no fluff, just what actually works. Chain Sling and Hardware Riggings

First, let’s cut to why cold weather is a problem here. Regular steel chain (the stuff most slings are made of) doesn’t just “get cold”—it loses ductility. Ductility is basically the ability to bend or stretch without snapping, right? When temps hover around 32°F or lower, steel becomes way more brittle, like that old beer can you left in the truck overnight—it cracks way easier. Add moisture (snow, ice, condensation from warm hands or gear) and you’ve got rust, which weakens links even more. And if you hang slings wrong, they might kink, which creates stress points that’ll blow when you least expect it. I’ve had a guy tell me he just drapes his sling over a pipe in the yard during winter—total no-go. That kink he accidentally left? It caused a 20% drop in the chain’s strength, and he didn’t even notice till a inspection.

Let’s start with the non-negotiable basics: clean ’em before you store ’em. I know, when you’re wrapped up in a winter jacket, the last thing you wanna do is scrub a chain sling, but this is make-or-break. Salt, mud, ice melt chemicals (like that brine they dump on roads and job sites) are the worst for cold steel. They eat through the galvanized coating (if you’ve got galvanized slings) way faster in low temps, and leave pockets of moisture that’ll turn to rust spots before you know it. Here’s my go-to method: use a stiff bristle brush and warm (not hot) soapy water—hot water can shock cold steel and make it more brittle, trust me. Scrub every link, get into the crevices where mud hides, and if there’s caked-on ice, let it thaw in a warm garage for 15 minutes first, don’t chip it with a tool (that can nick the steel, another weak point). Once they’re clean, dry ’em completely—no leaving them to air-dry in the cold wind. I keep a stack of old shop towels in my warehouse just for this; wipe each link till it’s bone dry, even the inside. If you skip the drying step, that leftover moisture will freeze overnight, expand, and cause micro-cracks you can’t see till the chain fails.

Next up: where to store ’em. A lot of guys think “out of the cold” means a shed, but not just any shed—dry, temperature-controlled if possible. I’m not saying you need a $10k climate-controlled warehouse, even a insulated shed that stays above freezing will do. If your only option is an outdoor spot (I get it, some job sites don’t have space inside), don’t just toss ’em on the ground. Elevate ’em! Put a wooden pallet under them, or a set of racks, so snow and ice can’t build up underneath. And never hang slings from a straight hook—hang them in a loose coil, or use a sling rack with curved pegs. Hanging straight creates a constant load on the links, which when cold, makes them more likely to stretch or snap. I once watched a sling hang from a job site hook all winter; when we tested it, the link had stretched 1/8 of an inch—hard to notice, but it meant the rated capacity was off by 15%. If you don’t have a rack, wrap the sling loosely around a heavy duty pipe, tie it with a soft rope (not chain, that’ll scrape the coating), and set it on a pallet. Also, no storing slings near chemicals—even things like fuel cans or hydraulic fluid, because the fumes can eat at the steel over time, especially in cold weather when the metal’s more porous.

Wait, what about lubrication? A lot of folks over-lubricate, some don’t do it at all—let’s get this right. In cold weather, dry chain is bad, but too much grease will attract snow and ice, which is exactly what you don’t want. For regular steel slings, a light coat of penetrating oil (like WD-40 Specialist Cold Weather, not the regular stuff) works perfect. It’s thin enough to get into the links, doesn’t thicken up when it’s 20°F, and repels moisture without gumming up. For galvanized slings, skip the oil—use a light corrosion inhibitor spray, because oil can break down the galvanized coating over time. I’ve seen a guy use regular automotive grease on his slings last winter; by February, the grease was solid as a rock, packed with ice, and he had to chisel it off to use the sling. Don’t do that. A quick spray or wipe, let it sit for 5 minutes, then wipe off the excess so it doesn’t collect crud.

Now, red flags to watch for when storing, especially in cold weather. First, check for kinks before you put the sling away. A kink is a permanent bend in the chain that creates a stress riser—when it’s cold, that riser is where the chain will break 9 times out of 10. If you find a kink, you can try to straighten it, but if it’s more than a slight bend, it’s better to retire that link (I always tell guys, don’t risk a $500 sling for a $5 repair that might fail). Second, look for rust spots. Small surface rust is okay, but if it’s pitted (you can feel it with your nail, like tiny holes), that means the steel’s already weakened. Third, don’t store slings with other heavy gear—like pipes or tools stacked on top. The weight can crush links, or leave indentations that become weak points when cold. I keep all my inventory on separate racks, and I tell customers to do the same—no stacking slings on top of each other, even if they’re empty.

What if you have to store slings on a job site with no shelter? I know, some remote job sites don’t have space to bring everything inside. Here’s the hack I’ve used for years: get a heavy-duty waterproof cover (the kind they use for outdoor equipment) and a few dehumidifier packs. Wrap the sling loosely, don’t stretch it, put the dehumidifier inside the cover where the sling is, then seal it tight. The dehumidifier will soak up any moisture that gets trapped, and the cover blocks snow and ice. But this is a temporary fix—don’t leave slings like that all winter. I’ve had a customer who left his slings covered like that for 3 months; when we inspected ’em, there was a tiny bit of rust in a spot the cover missed, because he didn’t brush off the snow before wrapping. So temporary only, okay?

Also, let’s talk about storage duration. If you’re storing slings for more than a month (like off-season for some construction guys), you need to do a full inspection before you lock ’em up. Check every link for cracks, measure each link’s diameter to make sure it hasn’t stretched (if a link is 5% skinnier than it should be, it’s time to replace it), and test the hooks to make sure they open and close properly—cold can make hooks seize up, and a seized hook is a big safety hazard. I do this every November for my own inventory, and I catch at least one bad sling a year that would’ve caused trouble if I left it in storage.

Wait, one common mistake I see: people mix slings with different grades. If you’ve got Grade 70 slings and Grade 43 slings, don’t store them together. The Grade 70 is higher strength, but it’s also more brittle in cold weather, so if a Grade 43 link rubs against it, it can scratch or nick the Grade 70, which weakens it. I keep different racks for different grades, and I tell customers to do the same—no dumping all your slings in one pile.

Let me throw in a quick real example to drive this home. Last January, a customer brought me a 20ft Grade 80 chain sling that he’d stored on his job site’s back porch, hanging from a nail, all winter. It had salt caked on it, no lubrication, and a big kink in the middle. When I tested the breaking strength, it was 30% lower than the rated capacity. If he’d used that sling to lift a 10,000lb load, it would’ve snapped. We cleaned it, straightened the kink, lubricated it, and it passed inspection—but I would’ve told him to replace it if the kink was worse. That’s why the little steps matter.

Now, how to actually put all this into practice step by step, so it’s not confusing. Step 1: After your last use of the sling, brush off all dirt, mud, and debris. Step 2: Thaw any frozen links if needed, dry completely. Step 3: Inspect for kinks, rust, stretched links, or bad hooks—fix or retire any bad parts. Step 4: Lightly lubricate (as needed, no over-greasing). Step 5: Store in a dry, temperature-controlled space, elevated, on separate racks, no heavy gear on top. Step 6: If storing outdoors temporarily, wrap in a waterproof cover with a dehumidifier, check weekly for ice buildup. Step 7: If storing long-term, do a full inspection once a month, not just at the start.

I get it, rigging’s a tough job, and adding storage steps can feel like extra work when you just wanna wrap up and go home after a long day in the cold. But trust me, spending 10 extra minutes to clean and store your slings right will save you thousands in replacement costs, and way more in avoiding a safety incident. A broken chain sling isn’t just a hassle—it can hurt people, damage equipment, and shut down a job for days. That’s the stuff no one wants on their plate.

If you’re looking for new chain slings, hardware riggings, or even cold-weather storage supplies for your gear, don’t hesitate to reach out. We’ve got a ton of Grade 70, 80, and 100 slings that are built to handle cold temps, plus all the lubrication, racks, and covers you need to store ’em right. Just get in touch with our team to talk through what you need, whether you’re a small shop or a big construction company. We’re here to help you keep your gear safe and your job running smoothly, even when the mercury drops.

Lifting Point References

  • Occupational Safety and Health Administration (OSHA). "Chain Sling Safety Guidelines for Cold Environments." 2022.
  • American Society of Mechanical Engineers (ASME). "B30.9: Safety Standard for Chain Slings." 2021.
  • National Association of Chain Manufacturers (NACM). "Cold Weather Storage Best Practices for Steel Chain Products." 2023.

Hangzhou Ruby Imp. & Exp. Co., Ltd.
As one of the most professional chain sling and hardware riggings manufacturers and suppliers in China, our products have good reputation in the market. Please feel free to wholesale durable chain sling and hardware riggings made in China here from our factory. Also, custom service is available.
Address: Taoyuan Industrial Park, Puyang Town, Xiaoshan, Hangzhou, Zhejiang, China.
E-mail: Sales5@z2lifting.com
WebSite: https://www.ruby-lifting.com/